| Iron Filter Regeneration Instructions |
Note: Regenerate filter monthly or sooner if needed. Failure to do
this can ruin the filter media. Normal life of filter media is 4 to 5 years.
1. Close valve on outlet side of filter (above lever).
2. Add recomended (depending on size) lbs. of potassium
permanganate to solution tank. Add 2-3 gals. of water (soft) to tank
and stir good.
3. Move lever to backwash position (1) for 10 minutes.
4. Move lever to suction position (2) then open suction valve on left
side of control unit. The suction is drawn out then close the suction
valve.
5. Leave lever in the suction postion (2) for 45 to 60 minutes or till no
color is detected at the end of drain line.
6. Move lever to rinse postion (3) and run 5 to 10 minutes to assure
the drain water is free of any color.
7. Move lever to service position and open outlet valve.
8. Open suction valve 3 to 5 seconds to purge suction line.
this can ruin the filter media. Normal life of filter media is 4 to 5 years.
1. Close valve on outlet side of filter (above lever).
2. Add recomended (depending on size) lbs. of potassium
permanganate to solution tank. Add 2-3 gals. of water (soft) to tank
and stir good.
3. Move lever to backwash position (1) for 10 minutes.
4. Move lever to suction position (2) then open suction valve on left
side of control unit. The suction is drawn out then close the suction
valve.
5. Leave lever in the suction postion (2) for 45 to 60 minutes or till no
color is detected at the end of drain line.
6. Move lever to rinse postion (3) and run 5 to 10 minutes to assure
the drain water is free of any color.
7. Move lever to service position and open outlet valve.
8. Open suction valve 3 to 5 seconds to purge suction line.
Home I Sales I Service I Regenerations